Programming Artromot; Sp3 Comfort; Protocol Details - Comfort Models - ARTROMOT SP3 Instrucciones Para El Uso

5.4 Programming
ARTROMOT
Comfort
®
ARTROMOT -SP3 Comfort devices
offer further functions at two additional
programming levels.
The programming levels are selected in
the same way as on Standard models.
Programming levels 1, 2, 3 and 6 are
identical with programming levels 1 to 4
of the Standard models.
With the default settingsall special func-
tions are disabled.
The following treatment values, settings
and information can be entered/viewed
on the programming unit (22):
LEVEL 1:
- dorsal extension
- plantar flexion
- inversion
- eversion
LEVEL 2:
- pause
- therapy timer
- speed
- new patient
LEVEL 3:
- reverse on load - motor A
- reverse on load - motor B
- motor A ON/OFF
- motor B ON/OFF
®
-SP3
MENU
MENU
MENU
60
LEVEL 4:
- warm-up protocol
- isolation program
- therapy documentation
dorsal extension /
plantar flexion
- therapy documentation
inversion / eversion
LEVEL 5:
- stretching in dorsal extension
- stretching in plantar flexion
- stretching in inversion
- stretching in eversion
LEVEL 6:
- transport setting
- synchronized/
non-synchronized mode
- total therapy time
- service menu
5.5 Protocol details –
Comfort models
- To access the programming level you
need, press the MENU key repeatedly.
- The treatment parameters are selected
with the different parameter keys.
- To change the treatment values, press
the + / – keys.
- To enable/disable a function, press the
respective parameter key again.
- To save the entered values, press the
STOP key.
With the default settings all special
functions are disabled.
MENU
MENU