Preamp; Ns (Noise Suppressor) - Boss ME-70 El Manual Del Propietario

Using the Effects
fig.0160

PREAMP

This models preamp response. You can also use it as an equalizer.
fig.0140
TYPE knob
Use this to choose the type of preamp.
0: OFF
1: EQ
2: CLEAN
3: COMBO
4: TWEED
5: STACK
6: LEAD STK
7: R-FIER
TYPE What the controls do
EQ
This sets the
CLEAN
amount of distor-
COMBO
tion of the preamp.
TWEED
STACK
LEAD STK
R-FIER
fig.0160

NS (Noise Suppressor)

This suppresses the noise and hum picked up by the guitar's pickup.
NS THRES (Noise Suppressor Threshold)
fig.0140
This adjusts the effect in response to the level of noise. A value of 0 switches off the noise suppressor.
Setting this higher than necessary may cause no sound to be produced when the guitar is played at low volume.
E-8
This turns off preamp modeling.
This is a 4-band parametric equalizer.
This is a clean sound that is smooth and warm.
This is a crunch sound reminiscent of a VOX combo amp.
This is a crunch sound like that of a Fender Bassman.
This is a sound reminiscent of 1970s Marshall amps.
This is a high-gain lead sound.
This models a Mesa/Boogie Dual Rectifier.
LOW
These adjust the volume
of the respective EQ bands.
GAIN
These adjust the volume
of the respective EQ bands.
LOW-MID HIGH-MID
Frequency
BASS MIDDLE TREBLE
LEVEL
HIGH
This sets the overall vol-
ume level.
LEVEL
This sets the overall vol-
ume level of the pre-
amp.
Frequency