Breville VCF152X Instrucciones De Uso página 30

CARE & CLEANING - GRINDER
Cleaning & Unblocking Grinder Burrs,
Collar, Grind Chamber and Outlet
• 1-2 Months
If the Grinder is used frequently
(everyday), the Burrs need to be cleaned
to ensure best performance of the
integrated Grinder. Regular cleaning helps
the Burrs achieve consistent grinding
results, which is especially important
when grinding coff ee beans for espresso.
• Grind Off Excess Coff ee Beans
- The machine is on and in the READY
state.
- Make note of the current Grind Setting
(to use as the starting point after
cleaning).
- Insert Two Cup Filter Basket into the
Group Handle.
- Insert Group Handle into Grinding
Cradle.
TWO CUP
- Turn Bean Hopper fully anti-clockwise
to close the Hopper Gates and unlock
the Bean Hopper. The Bean Hopper
will pop up slightly.
- Place your hand on top of the Bean
Hopper and push down lightly. At
the same time push down the Group
Handle to activate the Grinder.
Continue grinding until no more coff ee
grinds are emitted from the Grinder.
TURN
30
VCF152X_VCF153X_21MLM1 (EMEA).indd 30 VCF152X_VCF153X_21MLM1 (EMEA).indd 30
PUSH DOWN
AT THE SAME TIME
PUSH DOWN GROUP HANDLE
- Remove the Group Handle and
dispose of the waste grinds as these
will be too coarse for espresso coff ee.
- Remove the Bean Hopper from
the Grinder Collar and store any
remaining coff ee beans in an airtight
container to preserve their freshness.
REMOVE
• Preparing to Clean
- Turn off the machine, switch off &
unplug at power outlet.
CAUTION: Care should be taken when
cleaning Grinder Burrs as they are sharp.
• Cleaning Top Burr
- Fold the two handles up and lift the
Top Burr from the Grinder Collar.
- Wash the Top Burr in warm soapy
water with a mild detergent, rinse & dry.
Note: Spots & marks on the surface of the
Burrs are part of the hardening process (for
extra-long life). These marks do not affect
the performance of the Grinder or the taste
of the espresso.
• Cleaning & Unblocking Bottom Burr
and Grind Chamber
- Use the Cleaning Brush or a Vacuum
Cleaner to thoroughly clear the parts
and surfaces in the Grind Chamber of
fi ne coff ee grinds. A damp cloth can
be used to wipe the inside of the Grind
Collar.
- Allow thorough air drying.
AIR TIGHT
CONTAINER
5/14/21 15:52 5/14/21 15:52