Interrupting The Scale-Removal Cycle; Note On Counting The Number Of Steam Cycles And Interrupting The Scale-Removal Cycle - Jacuzzi sasha Uso-Mantenimiento

Interrupting the scale-
removal cycle
Note on counting the
number of steam cycles
and interrupting the
scale-removal cycle
(1) Press the indicated button: it lights up blue, then turns white after a few seconds.
(2) Within 4 seconds, press the indicated button, which will light up blue and then turn
white after a few seconds.
(3) Within 4 seconds, press the indicated button. It will light up blue then turn white
after a few seconds. The scale-removal cycle has been stopped.
1
2
3
Depending on when you interrupt the scale-removal cycle, the steam cycle count is suspended,
allowing you to continue to use the hammam function a certain number of times.
In other words, every hour of scale-removal cycle performed allows another 6 steam cycles to
be run before the system blocks the program again. In the same way, after two hours 12 steam
cycles are made available, after three 18 are available, etc. When the scale-removal cycle is run
to completion, the total is reset and the full number of steam cycles is available again.
Note that if the cycle is interrupted during the first hour (for example, after 59 minutes), the
6 additional steam cycles are not made available.
WARNING! Delaying activation of the scale-removal cycle may seriously com-
promise the efficiency of the steam generator and create potentially hazard-
ous situations.
Jacuzzi strongly recommends running the scale-removal cycle every time it is
indicated.
55