Setting Interval Times For Triple Bp Measurements (3X); Deactivation Of Beeper; Before Each Measurement; Selecting The Correct Cuff - Riester RBP-100 Manual Del Usuario

2.5.4 Confirm the selected time format by pressing the SET button. To exit without making
changes, press "Start/Stop" button (3).
• The device is delivered with default setting of 24h time format.
2.6 SETTING INTERVAL TIMES FOR TRIPLE BP
MEASUREMENTS (3X)
2.6.1 To change the interval time settings, press the SET button (4) once to enter the settings
menu, then cycle between different adjustments using "+"(5) and "-"(6) buttons.
2.6.2 Press the SET button (4) when the symbols for triple BP measurement (30), interval
symbol (20) and SET (23) appear in the display, to enter interval time adjustment.
2.6.3 You can now choose between different interval times of 15 seconds, 30 seconds,
45 seconds or 60 seconds by pressing repeatedly the "+" or "-" buttons (5/6).
2.6.4 Confirm your selection by pressing the SET button while the selected interval time is
shown on the display. To exit without making changes, press "Start/Stop" button (3).
• The device is delivered with default setting of 15 seconds interval time.

2.7 DEACTIVATION OF BEEPER

During blood pressure measurements, the pulse indicator (25) flashes in the display and
a beep sounds every time a heartbeat is detected.
2.7.1 To deactivate the beeper, press the SET button (4) once to enter the settings menu,
then cycle between different adjustments using "+"(5) and "-"(6) buttons.
2.7.2 Press the SET button (4) when 'BEEP" and SET (23) appear in the display, to enter
beeper adjustment.
2.7.3 Select „Off" or „On" by pressing the "+" (5) or "-" (6) buttons.
2.7.4 Confirm your selection by pressing the SET button. To exit without making changes,
press "Start/Stop" button (3).
• The device is delivered with default setting activated beeper.

3. BEFORE EACH MEASUREMENT

3.1 SELECTING THE CORRECT CUFF

Riester offers different cuff sizes. Select the cuff size to match the circumference of your
patients upper arm (measured by close fitting in the centre of the upper arm).
RBP-100