Mains Adapter - Riester RBP-100 Manual Del Usuario

When the battery pack is flat, the battery symbol (32) will flash as soon as the device is switched
on (flat battery displayed). You cannot take any further measurements and you firstly must
recharge the device with the delivered mains adapter.
Note:
- The memory retains all stored values.
- It takes approximately 6 hours to fully recharge the battery pack. Note that as battery pack
ages the recharge time will increase.

7.2 MAINS ADAPTER

You can charge this device by using the Riester mains adapter (AC/DC 7.5V, 1500 mA).
Additionally, the mains adapter also enables to use the blood pressure monitor without
inserted battery pack.
7.2.1 Plug the adapter cable into the mains adapter socket (11) in the blood pressure monitor.
7.2.2 Plug the adapter plug into the wall socket.
7.3.3 The mains adaptor symbol appears (33) and the LED battery indicator (7) turns orange
while the battery pack is being recharged.
• The LED battery indictor turns green as soon as the battery pack is fully recharged.
Note:
- Only use the Riester mains adapter available as an original accessory appropriate for your
supply voltage.
- Ensure that neither the mains adapter nor the cable are damaged.
RBP-100