Maintenance Summary Table - Grillo FM13.09 Uso Y Mantenimiento

PROCEDURE
check the level
Engine oil
Air filter
check the level
Hydraulic oil
Check that the cooler intake grid is clean
Check that blades are well-sharpened
and well-fixed
Lubricate with grease
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
LUBRICATION POINTS WITH GREASE
Find the lubrication points following the scheme. Lubricate with grease every 40 hours the rear axle pivots, the
pedals, the PTO transmission belt guide pulley and the pivot connected to 2 points of the cutting deck.
Translation of the original instructions

MAINTENANCE SUMMARY TABLE

EVERY 8
HOURS
change
check
replace
replace
AFTER 20 EVERY
HOURS
HOURS
●
change)
●
●
●
●
●
12
EVERY ONCE A YEAR OR
50 100
HOURS
●
(first
(first change after
●
●
EVERY 250
HOURS
●
‫٭‬
‫٭‬
500 hours)