EdmoLift AL Manual De Productos página 163

EdmoLift Products Manual
Use
1
Use of EdmoLift Lifts in other applications or loading conditions can alter the load capacity and lead to
hazardous situations. Additionally the warranty conditions may be invalidated.
Operation is assumed to be indoors in dry, temperate and well-lit premises, unless otherwise agreed by EdmoLift.
Enlargement of the load platform, off-centre loads, point loads or horizontal forces are not permitted, unless this has
specifically been stated as permitted in a particular application. The most appropriate choice of Lift table model is
dependent on the specific loading and operating conditions relating to each individual application.
In addition to the safety features incorporated in the lift further safety precautions may be required on or adjacent to
the Lift. Discuss appropriate actions with your EdmoLift representative, your safety representative, Health & Safety
Inspector or similar. We recommend that a Risk Assessment is carried out in accordance with the Machinery Directive.
See also Section "Operating Risks"
These instructions must be available for authorised personnel, stored in a protected location and accompany the
product if it passes to another place of work.
Lift table
2
EdmoLift Lift tables can be used for a wide range of applications. They are basically intended for lifting and lowering
of loads which are uniformly distributed over the entire platform, e.g on Euro-pallets. Typical applications are, for
example, feeding and stacking components for processing machines, assembly of electrical cabinets, machinery
maintenance etc.
Lift Tables are intended for operating on a flat, firm base or floor. They can be sited on the floor or recessed into a pit.
They can also be transportable on a wheeled chassis.
The floor/ground must be strong enough to support the Lift Table, together with the load. We recommend that all Lift
Tables intended for static operation are fixed to the floor, in order to avoid accidental movement if struck by a truck
or similar. In certain circumstances it is essential to fix the Lift Table to the floor to avoid instability, e.g when it is
equipped with a tilt function or intended for horizontal or eccentric loads.
Appropriate usage and loading information is detailed in this manual and can be found in EN 1570.
Copyright © EdmoLift AB 2004-2007
All rights reserved. No part of this publication may be reproduced, stored in a retrie-
val system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise without the permission of the publisher.
2005-02-01
EdmoLift AB
Jägaregatan 11
S-871 42 HÄRNÖSAND, SWEDEN
85921 GB
Tfn. +46 (0)611-83 780
17
Fax. +46 (0)611-51 15 80
info@edmolift.se