EdmoLift Products Manual
Application
Productions lines
E.g. Materials handling systems,
robot cell, packing plant, paper/board
production
Sheet handling
E.g. Manual stacking, feeding,
mechanized stacking and feeding
Workbench, general
E.g. Assembly work, servicing,
machining, welding, painting, packing,
handling of components to and from
machines
Copyright © EdmoLift AB 2004-2007
All rights reserved. No part of this publication may be reproduced, stored in a retrie-
70
val system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise without the permission of the publisher.
Risk
Performance - life span
Overloading
Risks at interface
Who is responsible for the CE-
marking?
Trapping between lift table and
machinery, walls, handrails etc.
Inadequate maintaining of level
Life span and reliability
Overloading
Risks at interface
Who is responsible for the CE-
marking?
Material/load can fall off
Trapping between lift table and
machinery, walls, handrails etc.
Unstable lift table
2005-02-01
Action, Example
Number of work cycles per hour/day/
working week. Raising/lowering
speed, with and without load.
Number of starts UP / DOWN per hour
Choose correct product with regards
to load distribution, load location,
mobile loads etc.
Risk assessment for the system.
Overall view - Emergency STOP
Define responsibility
Safety clearances in accordance with
EN Standard
Type of control system
Number of work cycles per hour/day/
working week
Choose correct product with regards
to load distribution, load location,
mobile loads etc.
Risk assessment for the system
Overall view. Emergency STOP
Define responsibility
Strapping or security devices.
Work site location
Prevent access to the hazardous area.
Safety clearances in accordance with
EN Standards
Carry out a stability calculation.
Consider all possible side forces.
Adequate fixing to floor/ground
EdmoLift AB
Jägaregatan 11
S-871 42 HÄRNÖSAND, SWEDEN
85921 GB
Tfn. +46 (0)611-83 780
Fax. +46 (0)611-51 15 80
info@edmolift.se