EdmoLift AL Manual De Productos página 175

EdmoLift Products Manual
•Do not use EdmoLift products as a workbench for welding work unless they are specially adapted for it.
•The product must not come in contact with food.
•Do not use the product in a potentially explosive environment.
•EdmoLift products are not insulated for electric currents and do not give any protection if live wires or objects are
touched.
•Keep safe distance from live wires or subjects.
•The surface treatment can emit unhealthy gases and contaminants e.g. when welding or grinding. Use suitable
protection and working methods
•Never alter or modify any parts of the products that are vital for safety and stability.
•Only EdmoLift original spare parts should be used when replacing any parts. Our Warranty commitment can
otherwise be invalidated.
•Lifts with tilting platforms require special consideration regarding the size and position of the load, so that instability of
the load and the Lift is avoided.
•When the application is in a public location, particularly when children can enter the work area, the operator shall
make satisfactory arrangements to prevent persons from entering the hazardous area. We recommend that a Risk
Assessment according to the Machinery Directive be undertaken for the specific work conditions
•Persons are not usually permitted to travel on the platform of EdmoLift products or to stay on the platform when it
is in the raised position. When travelling on the platform is permitted, this must be clearly and visibly stated on the
product's signage, and in the CE Declaration of Conformity.
•Products with batteries may not be used when charging.
•Batteries must be handled as ecologically harmful waste and therefore be left in an appropriate place.
•During inspections, servicing and repair work, there must be no load on the loading area. Chock the lift mechanism
with the safety supports.
•Contact with hydraulic oil may cause allergic reactions.
•Use appropriate load restraint suitable for each load and loading level.
When persons are permitted to travel on, or remain on, the platform:
Do not climb down from the raised platform!
Do not operate the Lift unless the handrail on the
platform is securely fixed and the gate is closed!
Do not sit on, or climb on, the handrail!
Always keep both feet on the platform floor!
Correct use, operation, inspections and maintenance are vital for safety at work, for work efficiency and for
Lifts with tilt
Armlifts
NOTE! The loading edge of the U, UE, and GB Arm Lift do not have safety frame protection. If it is not safe by
location, other safety measures may need to be taken, for example signage, or simply order the EdmoLift accessory
"Foldable loading edge", a light beam or a time delay limit switch. Carry out a risk assessment and consult your
EdmoLift representative regarding the most appropriate course of action to suit your application and site conditions.
Copyright © EdmoLift AB 2004-2007
All rights reserved. No part of this publication may be reproduced, stored in a retrie-
val system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise without the permission of the publisher.
operational reliability.
EdmoLift AB
Jägaregatan 11
S-871 42 HÄRNÖSAND, SWEDEN
85921 GB
2005-02-01
Tfn. +46 (0)611-83 780
Fax. +46 (0)611-51 15 80
info@edmolift.se
29