EdmoLift AL Manual De Productos página 192

EdmoLift Products Manual
Hydraulic valves
Hydraulic valve VE 31 (max 10 l/min) (Nr. 36067)
State voltage when ordering spare parts.
A = Flow control valve, adjustable
B = Connection for hydraulic hose
C = Pressure gauge connection point
D = Setting of maximum working pressure
Electrically operated check valve VE 14 and VE 14DT
VE 14 provides protection when a hose breaks, reduces hydraulic deflection and provides an 'anti-creep' function,
which helps keep the platform level.
VE 14DT Double (34887) is used to achieve a distinct stop. NB. A specially programmed control system is required
No. (35464).
B
A
E D A
E B
Copyright © EdmoLift AB 2004-2007
All rights reserved. No part of this publication may be reproduced, stored in a retrie-
46
val system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise without the permission of the publisher.
C
A = Solenoid valve coil
VE 14
B = Connection/cylinder
VE 14 DT
C = Connection/hose
nr. 34887
Hydraulic valve VE 54
State voltage when ordering spare parts.
A = Connection tilt cylinder (duoble acting)
B = Flow control valve, adjustable for three functions
C = Coil
C
D = Setting of maximum working pressure
E = Outlet for pressure gauge, e.g. TEMA120
F = Connection lift cylinder (single acting)
2005-02-01
B
A
EdmoLift AB
Jägaregatan 11
S-871 42 HÄRNÖSAND, SWEDEN
85921 GB
D
C
Tfn. +46 (0)611-83 780
Fax. +46 (0)611-51 15 80
info@edmolift.se