CST/BERGER LMPL20 Manual Original página 33

Main Menu of the PipeLaser
X X
ABC...
X X X X X X X X X X X X
Symbol Submenu
LASER POWER
GRADE UNITS
ABC...
OWNER DATA
SECURITY
* * * * * *
XY CALIBRATION
only for service personnel
X X Y Y
RF ADDRESS
"LASER POWER" Submenu
In the "LASER POWER" submenu, you can increase
the laser power to the maximal possible visibility and
adjust the flashing frequency.
The following options are possible:
Symbol Meaning
Increases or decreases the laser
power/visibility (1 to 9)
Laser beam flashes at full laser
power
(for improved visibility during align-
ment)
– Select the desired option with buttons 19.1 or
19.2.
– Option
Adjust the desired laser power with button 20.1 or
20.2.
– Press button 18 to return to the main menu.
Note: The flashing frequency set under the
option differs from the flashing fre-
quency during the self-levelling.
2 610 A13 727 • 13.10.10
* * * * * *
Y Y
See
page
33
33
33
34
34
9
:
"GRADE UNITS" Submenu
In the "GRADE UNITS" submenu, you can set
whether the grade value is to be displayed in percent
or per mille.
The following options are possible:
Symbol Meaning
Grade value in percent
e. g. +10.000%
Grade value in per mille
e. g. +10.000‰
– Adjust the desired unit of measure with buttons
19.1/19.2 or 20.1/20.2 and confirm the entry with
button 21.
– Press button 18 to return to the main menu.
"OWNER DATA" Submenu
Example:
N A M E
A D D R E S S
C I T Y S T A T E
P H O N E
A B C D E F G H
In the "OWNER DATA" submenu, you can configure
the information of the start indication (e. g. name,
address, telephone number, etc).
The available letters/numbers are shown at the bot-
tom of the display; above, you can see the currently
entered user information.
4 lines with 16 digits each are available for the entries.
Unused placeholders are indicated with empty-space
symbols " "; in the start indication, these are auto-
matically replaced with empty spaces.
– To assign the position of a letter/number, select an
arrow with button 19.1 or 19.2 "
The arrows are indicated left and right from the let-
ter/number selection.
– Press button 21 to move the cursor to the desired
position on the display.
Only 12 letters can be indicated at the bottom of the
display.
– Press button 20.1 or 20.2 to call up the desired let-
ter/number row.
I J K L
"/"
English | 33
".