The Body - LAMBERET SR2 Manuel De Mantenimiento Y Uso

C. THE BODY
To be done by the user.
Every week, check the following:
¶ Rear door rods in good working order.
¶ Rear door retainers in good working order.
¶ Door opening seals in good condition.
¶ Condition of the wall coverings.
¶ Condition of the floor coating.
¶ No play in the closing systems.
¶ Remove all traces of dirt from the rubber seals on the rear doors.
After 5000 km and 20,000 km and then once a year:
¶ Check the fixing devices used to connect the chassis and the body; in
particular check to make sure the clamps can't move and that there's no
sign of rust.
Cleaning the inside and outside panels:
This is done using hot water, with brushes for the bodywork, and standard
detergents.
Never use solvents (alcohol, acetone, etc.) on the painted or adhesive livery.
Where a high-pressure machine is used, the distance from the nozzle to the
washing surface must be at least 500 mm
Washing must always be done at a temperature of below 60°C.
Steam cleaning is forbidden.
If while carrying out the various checks you find any faults, take the
!
necessary corrective action. If in doubt, consult LAMBERET SAS.
SR/Version 1 September 2004
29