Stryker Sidne Manual Del Usuario página 17

3. Please note that there is no indication on the SIDNE Interface (Voice
and Tablet) regarding the maximum and minimum limits on the
following commands:
• Brightness/Darkness
• Focus Out/In
• Zoom In/Out
The only indication when these quantities have reached their limits will be when
the appropriate buttons/commands are grayed out.
Troubleshooting
Problem
No access to device
through Sidne™
EDAM LED is OFF*
All manuals and user guides at all-guides.com
Possible Solution
• This problem has several possible causes.
Please see solutions for each problem:
• The device is not communicating properly
with the EDAM. Ensure that the device is
properly connected to the EDAM. See the
"Connecting the Visum Power Box" section
of this addendum for more details. Attempt
the following solutions in order:
1. Power off the device.
2. Ensure that device adapter cable is
plugged into the EDAM.
3. Ensure that the device adapter cable is
plugged into the Visum Power box
control box.
4. Power on the device.
5. Ensure that the Visum wall panel
controls do not show any error. If they
do, then contact Technical Support.
13