Stryker Sidne Manual Del Usuario página 8

Setting up the EDAM
Note
Ensure that the Visum Power box and the Sidne™ console are powered
OFF.
1. Connect the EDAM to the Control ports of on the Visum Power box
using the adapter cables as shown in Figure 1.
Figure 1: Connecting the device adapter cable to the StrykeCAM Overhead Camera's control
box
2. Connect the two Sidne™ interface cables to the ports marked "O. R.
Lights" and "Overhead Camera" located at the bottom left of the EDAM.
3. Connect the other end of the Sidne™ interface cables to two of the eight
USB ports on the Sidne™ console (see Figure 2).
Figure 2: Connecting the Sidne interface cable to Sidne™
4
All manuals and user guides at all-guides.com