7 Shimano Etube Project Cyclist; Customization Of The Ep8 Rs System - Orbea BLUE PAPER URRUN 2022 Manual Tecnico

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

28 | ORBEA
SYSTEM WARN ING S/ ERR OR S
When an error or warning is detected in the system, the
SC-EM800 or SC-E5003 displays will show the warning or
error code on the screen.
SC-E5003
SC-EM800
ERROR
WARNING
Turn the bicycle Off and On again and connect it to the
Shimano Etube Project app. The error or warning code and
the troubleshooting procedure will be shown in the section
Maintenance>Error Log.
You can also consult the EP8 system manual for the error
codes and their solutions.
TECHNICAL MANUAL
The Shimano SC-E5003 display does not
have Bluetooth connectivity, and therefore
you will not be able to connect the bicycle to
the app on models with this display. To know
the troubleshooting procedure for an error or
a warning, consult the code in the Shimano
STEPS user manual or take your bicycle to
an authorized Shimano dealer to have it diag-
nosed or replace the original display for the
Shimano SC-EM800 display.
Rear the full Shimano STEPS warning and error code list
and troubleshooting procedure in the following link:
https://si.shimano.com/iER/STP0A
B LUE PAPER URRU N · 2022
0 7 SHIMANO ETUBE
PR OJ ECT CYC L I ST

CUSTOMIZATION OF THE EP8 RS SYSTEM

Models equipped with the Shimano SC-
E5003 display, which does not provide
Bluetooth connectivity, cannot be connected
to the Etube Project Cyclist smartphone app to
customise the assist modes power levels. If
you wish to modify the assist levels, take your
bicycle to an authorised Shimano dealer to
connect it to the Shimano Etube Professional
tool using the SM-PCE02 interface and make
the necessary changes or replace the original
display for the Shimano SC-EM800 display.
Using the Shimano Etube Project Cyclist app for
smartphones, you can customize the EP8 RS system to
adjust Urrun to your needs.
power for your riding style.
The EP8 motor also allows the selection of two different
that you need in every situation.
1. Open Etube Project on your smartphone.
Turn your bicycle on and run the app on your phone.
2. Select Register Ebike.
3. Select the unit to pair.
If the unit is not visible on the screen after a few
seconds, press one of the handlebar assist mode
remote switch buttons to activate the connection.
ORBEA | 29
steep climbing, slightly reducing the power delivery for a
for more demanding activities and steeper climbs,
delivering more power from the motor.
Consult the complete Etube Project app manual on
Shimano´s website. Etube Project also lets you customise
the remote lever buttons, view error reports, update the
Read the complete app manual here:
https://si.shimano.com/#/en/iUM/7J4MA
Download and install Etube Project Cyclist on your
smartphone from Google Play or the Apple Store.
2
3
EN

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido