Orbea BLUE PAPER URRUN 2022 Manual Tecnico página 16

30 | ORBEA
4. Register your bike on Etube Project.
Choose to change the pass key so only you can make
changes to your bicycle. If you do not wish to change
the pass key, continue to the next step.
5. Select Assist from the Customise tab.
6. Change the maximum torque and the assist charac-
your activity.
less steep climbing, slightly reducing the power delivery
by default for more demanding activities and steeper
climbs, delivering more power from the motor.
system using Etube Project.
visible on the app´s screen before disconnecting
the bicycle.
On models equipped with the Shimano SC-EM800 dis-
display´s menu (besides using the Etube Project Cyclist
app as described above).
· Setting menu screen (press and hold the display
button)
lected during an activity using the handlebar re-
mote lever.
TECHNICAL MANUAL
-
4 5
-
-
6 7
B LUE PAP ER U RRU N · 2022
Models equipped with the Shimano SC-
E5003 display, which does not provide
Bluetooth connectivity, cannot be connec-
ted to the Etube Project Cyclist smartphone
SC-E5003 display either. If you wish to se-
assist levels, take your bicycle to an autho-
rised Shimano dealer to connect it to the
Shimano Etube Professional tool using the
SM-PCE02 interface and make the neces-
sary changes or replace the original display
for the Shimano SC-EM800 display.
Read the Shimano SC-EM800 and SC-E5003 displays ma-
nuals on Si.Shimano:
https://si.shimano.com/#/
Or access the manuals directly:
Shimano SC-EM800 display manual:
https://si.shimano.com/api/publish/storage/pdf/en/
um/7H90B/UM-7H90B-001-ENG.pdf
Shimano SC-E5003 display manual:
https://si.shimano.com/api/publish/storage/pdf/en/
um/7HU0B/UM-7HU0B-000-ENG.pdf
Orbea models equipped with the Shimano
EP8 RS motor are designed and tested to
handle and behave as close as a muscular
bike. The motor power delivery, limited to a
maximum torque of 60 N.m, allows Orbea to
duces the overall weight of the bicycle.
Personal and component damage due to
altering the motor power output or torque
are not covered by the warranty conditions
and can be illegal in the country of use if
the maximum speed allowed for pedelecs is
exceeded.
SYSTEM E RRORS
If there are any errors in the system, Etube Project Cyclist
allows you to access the Error Log, where you can see the
error codes and their troubleshooting procedure.
Read the "System errors and warnings" section in the Use
of Urrun chapter of this manual to know how the system
shows current errors and warnings, the different error co-
des and their troubleshooting procedure.
-
ORBEA | 31
E N