Orbea BLUE PAPER URRUN 2022 Manual Tecnico página 21

40 | ORBEA
BLUE: Walk Assist selected but not active.
GREEN: Walk Assist active.
YELLOW: Eco
ORANGE: Trail
RED: Boost
Eco
Walk Assist Trail
Active
Walk Assist Boost
BATTERY: Charge level of the battery shown as a per-
centage.
If an external RS Range Extender battery is connected, the
system will account for the total capacity of both the in-
ternal battery and the Range Extender (612 Wh) and Tool-
box will show the percentage of battery charge remaining
based on the total capacity of the system.
If while using the bicycle the battery percent-
age level is not visible in Toolbox, the infor-
mation will be visible again when the battery
level drops by 1%. At that moment the Ep8
system will send the remaining battery level
information via Bluetooth to the Garmin de-
vice and the battery level will be shown in
the unit.
ASSIST LEVEL: Assist power delivered by the motor de-
pending on the assist mode selected. It is shown as a per-
centage of the total power available from the motor.
· Assist level visualization options (on Garmin watch-
es): Orbea RS Toolbox allows the assist level to be shown
in two different ways. Read the Data Fields Customi-
zation section of this manual to learn how to select the
TECHNICAL MANUAL
. You can choose the assist level to be shown on the
external colour band around the screen. Thus, the cur-
rent assist level will be displayed by a black line that
will travel through the motor power range (1%-100%).
areas of the engine power range. For example, only
the more powerful assist modes will allow the motor
to deliver power around its 100% potential.
41%-60%
21%-40% 61%-80%
Current assit
1%-20%
81%-100%
power delivery
. It is also possible to select the assist level to be shown
ered as a percentage of the total power available from
the motor.
Eco
Walk Assist Trail
Active
Walk Assist
Boost
RANGE: Available range (in km or miles) in the selected
assist mode with the remaining battery charge. The range
shown may change depending on the power delivered by
the rider, as well as the previous use of the bicycle.
SPEED: The bicycle´s current speed.
CADENCE: The rider´s pedalling cadence.
B LUE PAP ER U RRU N · 2022
DATA FIELDS CUSTOMIZATION
The order in which the system data is shown in Toolbox
can be changed using Garmin Express (PC or Mac) or the
Garmin Connect app (smartphones).
1. Open Garmin Connect on your smartphone and con-
nect your Garmin device.
2. Access your device through the app and navigate to the
Orbea RS Toolbox Setting menu:
Apps Management > Data Fields > Orbea RS Toolbox>
Settings
3.
drop menus and press Save.
4. Go back to the main app screen and select Sync Now.
When you connect your Garmin unit to Urrun, the data
will be displayed according to your saved selection.
-
If the unit was connected to Urrun when you saved the
changes, you will see immediately the changes after
you synchronise your device.
ORBEA | 41
E N