Orbea BLUE PAPER URRUN 2022 Manual Tecnico página 56

110 | ORBEA
REBOUND ADJUSTMENT SUGGESTION
OF FOX AND MARZOCCHI FORKS
The rebound adjustment depends on the shock air
pressure. The more air pressure, the more closed the
rebound circuit will have to be.
rrect rebound setting. Turn the rebound dial clock-wise
to the fully closed position. Then count "clicks" coun-
ter-clockwise as per the table below.
RECOMMENDED REBOUND SETTINGS
MARZOCCHI BOMBER Z2
Rider + gear Rider + gear
Clicks
weight (Kg) weight (Lb)
54-59 120-130 13
59-64 130-140 10
64-68 140-150 9
68-73 150-160 9
73-77 160-170 8
77-82 170-180 8
82-86 180-190 7
86-91 190-200 7
91-95 200-210 7
95-100 210-220 6
100-104 220-230 5
104-109 230-240 3
109-113 240-250 2
TECHNICAL MANUAL
-
RECOMMENDED REBOUND SETTINGS
FOX 34 FLOAT GRIP
Rider + gear Rider + gear
weight (Kg) weight (Lb)
54-59 120-130
59-64 130-140
64-68 140-150
68-73 150-160
73-77 160-170
77-82 170-180
82-86 180-190
86-91 190-200
91-95 200-210
95-100 210-220
100-104 220-230
104-109 230-240
109-113 240-250
B LUE PAPER URRU N · 2022
MARZOCCHI AND FOX FORKS SUGGESTED
COMPRESSION SETTINGS
Fox recommends to start with neutral high speed and low
speed compression settings and then adjust the high and
low speed compression dial depending on the riding style
and terrain conditions.
Turn the compression dials to the fully closed position
(clockwise). Then count clicks counter-clockwise as per
the tables below.
MARZOCCHI BOMBER Z2 COMPRESSION
ADJUSTMENT
The cartridge has two compression preset positions:
Clicks
Open and Firm Fox recommends to start in the Open po-
sition and use the rest of the positions depending on the
terrain and conditions.
13
The positions between the Open and Firm modes can be
12
11
10
9
8
7
6
5
4
3
2
1
ORBEA | 111
FOX 34 FLOAT GRIP COMPRESSION A
DJUSTMENT
cant changes in terrain, and is intended to be adjusted
throughout the ride. Turning the lever to the full coun-
ter-clockwise position sets the fork in the Open mode.
Turning the lever to the middle detent position sets the
fork in the Medium mode. Turning the lever to the full
clockwise position sets the fork in Firm mode.
FOX recommends beginning with the 3-position lever in
the Open mode.
The positions between the Open, Medium, and Firm modes
EN
-
-