Product Description - Novoferm tormatic TAD MS 400V Manual De Instrucciones Y De Montaje

Safety devices and protective systems
• Main switch
By means of the main switch, all poles of the control and the
controlled door system can be separated from the mains.
• Emergency stop switch
By means of the emergency stop button connected, the
movement of the controlled door system and loading bridge
is stopped.
Tripping or falling hazard when loading!
CAUTION
With the control switched off, triggered emer-
gency stop switch or active restart lock, the float-
ing position of the loading bridge is not active
and the vertical movements of the truck are not
balanced out.
• It is not permitted to drive on the loading
bridge until restart.
How to respond after the emergency
• Main switch
Set the switched off main switch to position "I" (On) after
having resolved the emergency.
• Emergency stop switch
If an emergency stop switch has been connected by the
customer, you have to unlock it according to the
manufacturer's information after having resolved the
emergency.
Further safety devices such as light grids, photoelectric sensors
or safety edges can be connected. The personnel must be in-
structed with regard to the exact configuration and its function.
22 - EN
3

Product description

Control elements
11
10
9
8
1 LED display
2 Door OPEN button
3 HALT button
4 Door CLOSE button
5 Support button
Programming control elements
1
3
4
1 LED display
2 LED spot (confirmation of
the programming entry)
TAD MS 400V / 230V
6 RETURN loading bridge
button
7 Housing cover
8 LIFT loading bridge button
9 Main switch
10 AUTO button
11 green LED illuminated:
active button
green LED not illuminated:
inactive button
(applies to all buttons)
2
5
3 Up navigation button
4 Down navigation button
5 Programming button (Prog
button)
1
2
3
4
5
6
7