Set-Up Instructions - Forward Lift MCH13 Guía De Instalación, Operación Y Mantenimiento

1. Unpack lift in desired operating area. Remove and
discard protective wrapping, as well as unpainted
shipping bracket, Fig. 1.
Shipping Bracket
Front
Adjustment
(If Equipped)
Loosening raises, Tightening
Lowers Ride Height
(8mm or 5/16" Allen Wrench)

SET-UP INSTRUCTIONS

2. Adjusting Wheels: Remove bolt securing wheel assembly
Fig. 1
Adjust To Provide Floor
Clearance (Approx. 3/8")
Tighten Raises, Loosening
Lowers Column Ride Height
(30mm or 1-3/16" Wrench)
Fig. 3
Front
Adjustment
6
in place, Fig. 2. Adjust M20 Bolt (30mm or 1-3/16"
wrench) to provide clearance to floor at back of column
(recommended approx. 3/8" clearance), Fig. 2. Adjust
M10 (8mm or 5/16" Allen wrench) socket head bolts at
front of legs, until head is flush with surface. The lift will
collapse springs and set on ground when loaded, Fig. 3.
Remove Bolt
Securing Wheel
Assembly
Fig. 2