Forward Lift MCH13 Guía De Instalación, Operación Y Mantenimiento página 8

7. If Wireless - Antenna Mounting: Mount antenna by
screwing it into the bulkhead on the top of the column
(removing cover from bulkhead), Fig. 5. Antenna will be
in baggie zip-tied on disconnect, Fig. 6.
Fig. 5
Antenna
8. Remove wire-tie from disconnect, Fig. 6. Lift is ready
to use. Follow Lift Initialization Instructions section for
lift operation. Recommend 1 lift cycle without vehicle
on lift to get familiar with the lift. If bouncing is noticed
when lowering, air is likely in cylinder and bleeding is
recommended, see bleeding instructions.
Fig. 6
10. Complete Warranty Tag for full warranty coverage.
8
Wire Tie