SURE petcare SureFeed Microchip Pet Feeder Connect Manual Del Usuario página 9

Adding your pet to the feeder
When adding your pet's microchip ID into the Microchip Pet Feeder Connect, make sure all
other pets and any unrequired collar tags are kept out of the way.
1
Press the 'Add a pet' ( ) button found
at the rear of the feeder.
3
Put some food/treats into the bowl
and place the feeder where you would
normally feed your pet.
5
When your pet moves away, the lid will
close and the green LED will turn off. Their
microchip ID is now permanently stored.
To program a pet's microchip ID, sensors located in the hoop of the feeder must
detect the pet's presence. Therefore it's important to ensure your pet places their
head through the hoop to eat.
To program a Sure Petcare RFID Collar Tag, simply follow the steps above but hold
the collar tag inside the hoop. Make sure you are not wearing any metal jewellery
when programming a collar tag.
If you already have a pet in your Sure Petcare household, it is possible to assign
them to the feeder. Go to the household section of the app. If you add the wrong pet by
mistake you can always correct it here.
15
2
The lid will open and the rear LED will
flash green once every second.
4
Whilst your pet eats, the feeder scans their
microchip ID. Once the ID has been added,
the LED will stop flashing (but remain on).
If you need to, you can cancel the 'Add a pet'
mode at any time with a second press of the
'Add a pet' ( ) button.
Setting portions
The Microchip Pet Feeder Connect not only monitors when and what your pet has been eating,
it can also help you to provide accurate portions each time you feed your pet.
Why should you portion your pet's food?
Could your pet benefit from losing a few pounds?
By setting a portion weight you can ensure you're
not accidentally giving them too much food every day.
It all adds up!
The ability to weigh out portions of food directly into
the feeder makes it quicker, easier and more convenient
to ensure your pet is eating the correct amount.
How much should you feed your pet?
It can be difficult to know how much is the right amount for your pet,
especially when there is so much choice. We recommend consulting
your vet or animal health advisor to see what they recommend.
Alternatively, stick to the guidelines provided on the packaging by
the pet food manufacturer. This information is normally a good guide
for average, healthy pets.
How to set the portion weight in the app
You can set the portion weight in the Sure Petcare App. Once set, this
amount is sent to the feeder so it knows how much food you want to
give your pet per serving.
The portion indicator lights on the feeder will then guide you as food
is added, to ensure the correct portion is given. The lights represent the
amount of food added, see page 18 for more information.
EN
16