Nilfisk Liberty SC60 Instrucciones De Uso página 31

TEACH ROUTE FOR AUTONOMOUS MODE - CONTINUED
14 Select the desired label for this route, then press "Add
Label".
15 The touchscreen displays the route with the label. The
operator has three options;
a. Press "Edit Label" to change the label.
b. Press "Remove Label" to delete the label from the
route.
c. Press "Save" to save the route with the new label.
16 The display will show "Route saved". If no label is chosen
the route saved message will state "Route saved without
label". A label can be added later if desired.
17 Once the route is saved it should be tested to see if it
can be run successfully in autonomous mode. See "Run
Autonomous Route" on page 35.
11/2020
INSTRUCTIONS FOR USE
56091234 - Nilfisk Liberty SC60
ENGLISH - A
A - 31