Descargar Imprimir esta página

Helite Airbag OFF-ROAD Manual De Instrucciones página 25

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

2. PRODUCT PRESENTATION
a) The elements of the airbag OFF-ROAD (OFF-ROAD V2)
1
KENNY
1
Jacket with integrated airbag
It integrates the CDU electronic card, the 2 OFF ROAD cartridges and the rigid
protectors. The sleeves of the jacket are removable (could be sold separately). It
also has a space to put a water bag.
2
CDU electronic card
It analyzes the situation in real time (position of the rider in space, movement,
speed, etc.) and detects accidents or falls. It incorporates a non-removable Lithium
Ion Cylindrical Battery 3.70V 2600mAh. It has 4 cables : a cable to recharge the
battery, two cables to connect the cartridges
cable to connect the remote HMI.
CDU electronic card must be used exclusively with OFF-ROAD airbag. You must not
remove it, use it outside, alone or in another textile.
RF characteristics: 868MHz -916MHz (0dBm).
GPS reception frequency: 1565.42 - 1585.42MHz (GPS) / 1602 - 1610 MHz (GNSS).
3
Cartridge OFF ROAD with pyrotechnic triggering system
It consists of pressurized CO2 gas, a pyrotechnic triggering system and
a locking connector
new cartridges already installed and ready to use. If a fall or accident
is detected, the pyrotechnic triggering system integrated in the cartridge
will pierce its cover and release the gas that will inflate the airbag.
After the first inflation, the electronics automatically switch to the other cartridge if
it is new, and the airbag becomes operational again (see page 36).
GOOD TO KNOW
The left side cartridge is always the first to be fired.
The cartridges can be replaced easily and quickly by yourself (see page 36). There is
a single cartridge reference for the OFF-ROAD airbag : OFF ROAD 50 cc.
2
3
. The airbag OFF-ROAD is sold with two
4
KENNY
2
x
(locking connector) and a
25
5

Publicidad

loading

Este manual también es adecuado para:

Off-road v2