Helite Airbag OFF-ROAD Manual De Instrucciones página 37

2 Remove the empty cartridge(s) by opening the pockets located in the back
on each side. Unplug the cartridge(s)
unscrew the cartridge(s).
3
Remove the gas.
Flatten the airbag with your hands.
4 Install the new Helite cartridge(s) of the same reference. Insert the cartridge
cable into the cylinder. Be careful not to twist or bend it while screwing it in, as
this could damage it. Screw the cartridge as far as possible. Be careful not to
screw it in crooked. Connect the cartridge to the CDU electronic card
(locking connector), caution plug in the connector in the right way.
(caution, unlock the clip) and
MAX
37