Helite Airbag OFF-ROAD Manual De Instrucciones página 26

26
English
PRECAUTIONS FOR USING THE CARTRIDGE
• The cartridge is for single use only and must be replaced as soon as the two inflations
have taken place, with a new cartridge of the same reference.
• Use only Helite brand cartridges available from your dealer or on the helite.com
website.
• Gas cartridges are considered hazardous materials and should be kept out of
reach of children and used with care.
• Never plug in the cartridge until it is completely screwed into its slot.
• If rust stains or signs of deterioration appear on the cartridge, replace it immediately
and contact your dealer or Helite at sav@helite.com.
• The cartridge should be stored at temperatures between 0°C (32°F) and 45°C
(113°F). It should be stored away from moisture and light.
• If the cartridge has been stored at temperatures below 0°C (32°F), we recommend
keeping it at ambient temperature for several minutes before using your airbag to
avoid malfunction of the airbag.
• Do not expose the cartridge for a long period of time to high temperatures (in full
sun in a car, near a radiator, etc.) near a surface or flammable objects.
• Do not hit the cartridge, do not drop it, do not cut or pierce it, and do not throw
it into fire.
• Caution, the gas inside the cartridge is compressed to a very high pressure.
• Find more information about the annual verification of the cartridge on page 40,
its recycling on page 40 and its warranty on page 40.
4 The rigid protectors
They are integrated into the airbag jacket at the front, back, shoulders and elbows.
They absorb shocks and distribute the force of impacts. You must not use the
airbag if the pectoral and/or dorsal have been removed.
Identification of the protectors included in the airbag :
OFF-ROAD
Dorsal
Pectoral
Elbow pads
Shoulder pads SAS-TEC
5 USB cable
It allows to recharge the battery of the airbag CDU electronic card (see page 34).
XS
SAS-TEC SAS-TEC
niv-1|LB-L niv-1|LB-XL
Kenny Kenny
niv-2|Mission niv-2|Mission
SAS-TEC SAS-TEC
niv-2|SK 1/15 niv-2|SK 1/42
SAS-TEC
niv-2|SK 1/15 niv-2|SK 1/15
S/M L/XL
SAS-TEC
niv-1|LB-XL
Kenny
niv-2|Mission
SAS-TEC
niv-2|SK 1/42
SAS-TEC
niv-2|SK 1/42
2XL
SAS-TEC
niv-1|LB-XL
Kenny
niv-2|Mission
SAS-TEC
niv-2|SK 1/42
SAS-TEC
niv-2|SK 1/42