Publicidad
Idiomas disponibles
Idiomas disponibles
1
YEAR
WARRANTY
• Avoid contact with the electrical circuit, it can have negative consequences for the operator's health.
• The low DC voltage of the machine output makes it suitable for use in confined or humid spaces.
However, excessive moisture or sweating on clothing should be avoided. Make sure there is an
insulated surface where the machine can be placed.
• Pay attention to grounding systems when welding on electrically operated equipment or systems.
Improper connections to your welding equipment can allow welding process current to flow through
the grounding system. Always connect the work clamp as close as possible to the welding area, avoid
placing it in a random place.
• In the event of an accident, disconnect the machine from the electrical outlet immediately.
• Only allow qualified personnel to repair the machine with original spare parts, this guarantees that
the machine remains in optimal operating conditions.
• Keep the machine out of the reach of rain and do not use it in humid environments.
Risk generated by welding sparks
Sparks produced by the electric arc can cause fires or explosions if they come into contact with flammable
or explosive materials.
• Do not use the device in environments that present an explosion hazard or where there are
flammable liquids, gases or dust. The welders produce sparks and molten metal that can start a
conflagration.
• Remove all flammable substances from the job site. Fire cannot be detected while using eye
protection when welding.
• Do not carry out welding processes on containers, naval artifacts or pipes that have contained
flammable liquids such as gasoline, mineral oils or gas even if they were unoccupied a long time ago
since a small quantity may represent an explosion risk.
4
Publicidad
