Drawings - MORIA M2 Manual De Instrucciones

11 DRAWINGS

A. M2 HEAD
1 Head calibration value
2 Female collar
3 Blade housing
4 Flap housing
B. M2SU HEAD
1 Blade
C. M2 BLADE
1 Cutting edge
2 Blade holder
D. M2 HEAD WITH INSERTED M2 BLADE
1 M2 head
2 M2 blade
E. OPEN PEEL POUCH
1 Place the protective case on a plane
surface
2 Lift the top of the package with caution
F. LOCKING LEVER
1 M2 motor without locking lever
2 M2 motor with locking lever
G. DISTAL SHAFT OF M2 MOTOR (MOTION AND
OSCILLATION)
1 Oscillation of the blade
2 Rotation of the keratome on the eye
H MOUNTING THE M2 HEAD ON THE M2
MOTOR
1 Engagement of motor inside the head: align
the 2 black dots
2 Locking of the head onto the motor: screw
counter-clockwise the nose of the electrical
motor onto the head
I. MOUNTING THE M2SU HEAD ON THE M2
MOTOR
1 M2 motor
2 M2SU head
3 Package of M2SU head
J. M2 SUCTION RING
1 Handle
2 Guide
3 Aperture
4 Adjustable stop ring
5 Pre-set starting and ending position mark
6 Identification of suction ring
7 Pivot
8 Mark of hinge position
K. CLOSE VIEW OF THE STOP RING ON M2
SUCTION RING
1 Safety screw
2 Stop ring
L. VIEW OF THE STOP RING
1 3 stop positions
2 4 stop positions
M. CONNECTING THE SUCTION RING TO THE
ASPIRATION TUBING
1 Aspiration tubing end
2 Suction ring end
N. LOCKING THE M2 MICROKERATOME
MOTOR AND HEAD ONTO THE SUCTION
RING
1 Rotation shaft NOT in contact with rear stop
2 Rotation shaft in contact with rear stop
O. ENGAGEMENT OF HEAD ON THE M2 RING
1 M2 motor with M2-M2SU head
2 M2 suction ring
P. M2 LOCKING RING SYSTEM
Unlocked
1 Turn the locking ring until the 2 marks are
aligned
2 Turn the locking ring until the 2 marks are
aligned
Locked
3 2 marks are aligned
Q. CLEANING OF MOTOR
1 Oscillation shaft
#65013-F-02.2017
13
MORIA