Descargar Imprimir esta página

Braun MultiGrill 7 Manual De Instrucciones página 26

Ocultar thumbs Ver también para MultiGrill 7:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 57
of the same food.
The grill/barbecue position can be used to grill cuts of
meat with different thicknesses, each with the preferred
level of cooking. In this position, you need to turn the
food during cooking.
-
The appliance can also be used as a griddle/barbecue
plate to prepare pancakes, eggs, cheese, fritters and
bacon and sausages for breakfast (see figure 6).
The large cooking surface enables a number of different
foods to be prepared simultaneously, or to cook more of
the same food.
Oven Grill
This position (see figure 7) is suitable for grilling without
contact thick foodstuffs that need to be roasted slowly and
uniformly.
It is ideal for preparing vegetables with high water content,
so the water can evaporate.
You can also use this hot plate position to prepare soft
sandwiches and foods which do not require pressing.
-
Place the food on the lower plate.
-
Bring the upper plate near the food, holding the handle
(fig. A).
-
Put the grill plates lock/release device (4) to desired
oven position by sliding the lever.
-
The upper plate is locked in position. There are 5
positions of height regulation (fig. B).
USE
Operation
When the appliance has been prepared correctly and you are
ready to cook, you can set a temperature from 60°C to 230°C
for each grill plate (upper and lower) independently (using
the thermostat dials 11 and 12).
Press the start/stop button and the ON light will come on.
The appliance takes some minutes to heat up depending
on the set temperature. When the thermostat reaches the
required temperature, the appliance emits a beep, and is
ready to use. "READY" appears on the display.
The temperature can be changed at any time during cooking,
depending on the type of food being prepared.
Please note: the appliance is equipped with 2
adjustable front feet (16) that facilitate the draining of the
oil into the grease tray.
Timer function
When "READY" appears on the display, select the cooking
position (see the section "Cooking Position"), then place
the food on the plates. The cooking time can be selected
by pressing the timer buttons (9 and 10); at the end of the
cooking time "END" is displayed; the appliance will remain
on. When the food is cooked, switch the appliance off by
26

Publicidad

loading

Este manual también es adecuado para:

Cg 7044Cg 7040