Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TYPE OF BEVERAGE
disabled
1 short coffee
2 short coffees
1 long coffee
2 long coffees
1 carafe
1 jug
1 cappuccino
2 cappuccinos
1 white coffee
2 white coffees
1 milk
2 milks
The description of the type of beverage
will then be shown on the display each
time we want to review the description of
the button.
The ENTER button confirms the value and
you can proceed to the following para-
graph.
The RESET button takes you back to the
previous menu: BUTTON SELECTION
leaving the value of the parameter as it
was before the alteration.
Right or left grinder
The grinder associated with the button
selected,
, is defined.
The
and
buttons allow you to select
the grinder: right grinder or left grinder.
The ENTER button confirms the value and
you can proceed to the following para-
graph.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Pre-infusion
The pre-infusion time of the dose is pro-
grammed.
46
The
and
buttons allow you to alter the
pre-infusion time: 0.0÷10.0 sec., step 0.1
sec. Setting 0.0, the pre-infusion is disabled.
The ENTER button confirms the value and
you can proceed to the following para-
graph.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Discharge
The discharge time is programmed (time
needed for drying the coffee PASTIGLIA
after delivery). The
and
you to alter the discharge time: 0.0÷10.0
sec, step 0.1 sec. With a setting of 0.0 the
discharge is disabled.
The ENTER button confirms the value and
you can proceed to the following paragraph.
The RESET button takes you back to the
previous menu leaving the value of the para-
meter as it was before the alteration.
Upper motor
The running time of the upper motor is
programmed before running the lower
motor during the discharge phase. The
buttons
and
allow you to alter the run-
ning time: 0.5-1.5 sec. Step 0.1 sec.
The ENTER button confirms the value and
you can proceed to the following para-
graph.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Lower motor
The running time for the upper motor is
programmed from the beginning of the
cycle to define the compression of the cof-
fee powder.
The
and
buttons allow you to alter
the discharge time: 0.0÷10.0 sec. With a
setting of 0.0 the discharge is disabled.
The ENTER button confirms the value and
you can proceed to the following para-
graph. If it is the last parameter of the
dose go back to the previous menu.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Button parameters
The following table lists the parameters
requested for programming the buttons for
each type of beverage.
buttons allow
COFFEE SELECTIONS
Parameter
priority grinder
pre-infusion
discharge time
upper motor time
lower motor time
CAPPUCCINO SELECTIONS
Parameter
priority grinder
pre-infusion
discharge time
upper motor time
lower motor time
sequence
milk discharge
MILK SELECTIONS
Parameter
milk discharge
CAFFE LATTE SELECTIONS
Parameter
priority grinder
pre-infusion
discharge time
upper motor time
lower motor time
milk discharge
Range
Step
right grinder
-
left grinder
0.0÷10.0 sec.
0.1 sec.
0.0÷10.0 sec.
0.1 sec.
0.5÷1.5 sec.
0.1 sec.
0.0÷1.0 sec.
0.1 sec.
Range
Step
right grinder
-
left grinder
0.0÷10.0 sec.
0.1 sec.
0.0÷10.0 sec.
0.1 sec.
0.5÷1.5 sec.
0.1 sec.
0.0÷1.0 sec.
0.1 sec.
milk-coffee
-
coffee-milk
0.0÷5.0 sec.
0.1 sec.
Range
Step
0.0÷5.0 sec.
0.1 sec.
Range
Step
right grinder
-
left grinder
0.0÷10.0 sec.
0.1 sec.
0.0÷10.0 sec.
0.1 sec.
0.5÷1.5 sec.
0.1 sec.
0.0÷1.0 sec.
0.1 sec.
0.0÷5.0 sec.
0.1 sec.
Publicidad
Tabla de contenido
