Boiler Temperature - Nuova Simonelli CAFFETTERIA ITALIANA Instrucciones De Manejo

Historical alarm
By means of the and
the HISTORICAL ALARM option, then
press the ENTER button to visualize the
alarms.
Alarm visualization
The display visualises the description of
the error, the date and time when the
alarm was signalled. The most recent
alarm signalled is seen first.
The machine keeps the 10 most recent
errors in its memory.
With reference to the section "Alarms and
time-out", the alarms recorded in the
memory are the following: Motor
Mechanism Time-Out; No signal from the
Volumetric Meter; Infusion Time-Out; Steam
Boiler Level Time-Out; Boiler Temperature
Alarm; Coffee Unit Temperature Alarm.;
Boiler Heating Time-Out; Unit Heating Time-
Out; Alarm Sensors.
Buttons and allow you to visualise
the successive alarms in the order in
which they have been recorded.
The RESET button takes you back to the
previous menu: HISTORICAL ALARM.
INSTALLATION
By means of buttons and
INSTALLATION option, then press the
ENTER button to confirm and proceed.
Within the installation section the following
options are provided:
• language selection

• boiler temperature

• unit temperature
• coffee grounds no
• main softener filter
• maintenance cycles
• sequential heating
• serial selection
• electronic validator (tbd)
• simplified coin system (tbd)
buttons go to
• n digit decimal prices (tbd)
• standard programming
Buttons
tion the options in installation mode.
The ENTER button allows you to access
the selected function.
The RESET button takes you back to the
previous menu.
Language selection
The language to be used with the operator
is defined; that is, the language that will
be visualised on the LCD display.
Buttons
desired language: Italian, English, French,
German, Spanish.
The ENTER button confirms the value and
you can proceed to the following paragraph.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Boiler temperature
The temperature to which the coffee boiler
is heated is programmed.
Buttons
preset temperature of the coffee boiler:
go to the
75÷95 °C, step 1°C.
The ENTER button confirms the value and
the machine returns to the previous menu:
BOILER TEMPERATURE.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Unit temperature
The temperature to which the coffee unit
is heated is programmed.
Buttons
and are activated to selec-
and allow you to select the
and allow you to alter the
and allow you to alter the
preset temperature of the coffee unit:
70÷95°C, step 1°C.
The ENTER button confirms the value and
the machine returns to the previous menu
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Coffee grounds number
The quantity of coffee grounds which will
turn on the signal "waste tray full" is pro-
grammed.
Buttons and allow you to alter the
value of the coffee grounds: 0÷40, step 1.
The ENTER button confirms the value and
the machine returns to the previous menu
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Main softener filter
The number of litres of water which will
turn on the signal "maintenance anti-sca-
ling filter" is programmed.
Buttons and allow you to alter the
number of litres: 0÷9950, step 10. With
the setting 0000, the CPU does not initiate
a check on the number of litres that pass
through the purifier.
The ENTER button confirms the value and
the machine returns to the previous menu
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Maintenance cycles
The number of cycles of the coffee unit
which will turn on the signal "maintenan-
ce" is programmed.
Buttons and allow you to alter the num-
ber of cycles: 0÷9950, step 10. With the set-
ting 0000, the CPU does not initiate a check
47