Publicidad
Idiomas disponibles
Idiomas disponibles
how your spa functions
BASIC: Water is drawn through the drains in the foot well and the skim fi lter on the side of the spa. Water is pumped through a fi lter, over the heater,
into the Ozone Reaction
Chamber and returns to the jets. Water entering the spa has been fi ltered, heated and mixed with air ready for use. Note: A sensor on the heater
ensures water fl ow over the heater before allowing the heater to energise.
JETS: All regular jets can be fl ow adjusted by rotating the face of the jet. As the jet is turned clockwise the air at the jet is gradually reduced, then the
water. As the jet is rotated counter-clockwise, water fl ow is increased then the water and air mix is increased.
FILTER: A weir is located on the skimmer. It is used to skim oils and fl oating pieces of debris from the surface of the spa. (If applicable, the weir
should be facing in to the skimmer opening.)
AIR CONTROLS: Air Controls inject air into the jets via a venturi system. Rotating the left or right control from Min. to Max. activates the air control.
NOTE: The system functions when your jets are at full power only.
NOTE: On spas with "Turbo" Option, one or more air controls may not do anything as they have been made redundant
Your spa exposed
2" Jet body
1" Air pipe
pack
2" water pipe
Water manifold
3" Jet body
Front access side of spa
Rear side of spa
3
Publicidad
