Sanycces SPA407 Manual De Instalacion Y Uso página 65

The control can be restricted to prevent unwanted use or temperature adjustments.
Locking the panel prevents the controller from being used, but all automatic functions are still active.
Locking the Temperature allows Jets and other features to be used, but the Set Temperature and other programmed settings
cannot be adjusted.
Temperature Lock allows access to a reduced selection of menu items.
These include Set Temperature, FLIP , LOCK, UTIL, INFO and FALT LOG.
Main Screen
Press Menu/Select
repeatedly until LOCK
appears in the LCD.
Locks Temp. and Settings.
To next item in
Main Menu
Panel Locked
Main Screen
Any
Button
Press
Temperature Locked
Main Screen
When the Temperature is locked, the panel will display the Set Temperature
by pressing a Temperature Button, as ususal.
LOCK will appear if an attempt to reset the temperature is made with a subsequent button press.
Adjustable settings in the menus are also locked.
Other function buttons will operate normally.
This Unlock sequence may be used from any screen that may be displayed on a restricted panel.
While pressing and holding the Temperature Button (or UP button, if available),
NOTE: If the panel has both an UP and a Down button, the ONLY button that will work in the
Unlock Sequence is the UP button.
The temperature will not Unlock if the Unlock sequence is done while the panel
is displaying "LOCK".
18
restricting operation
Locks all function buttons.
A few seconds
Main Screen
A Few
Seconds
A Few
Seconds
unlocking
Slowly press and release the Menu/Select button two times.
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Menu/Select button
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
*****
ignores any change to that menu item.
LOCK will remain on the display
for 3 seconds and then revert to the normal display.
Main Screen
A Few
Seconds
Main Screen
To Set
*****
Waiting a few
seconds reverts
to origianl settings
Main Screen