Main filtering
Filter cycles are adjusted by setting a start time and its duration. The start time is indicated by an "A" or "P" in the lower right corner of the screen.
Duration is not marked "A" or "P". Each setting can be adjusted in 15 minute increments. The panel calculates the end time and displays it
automatically.
Main Screen
Press Menu/Select
repeatedly until FLTR 1
appears in the LCD.
To next item in
Main Menu
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
It is possible to overlap Filter Cycle 1 and Filter
Cycle 2, which will shorten overall filtration by the
overlap amount.
filter settings
Shows/flashes start time
to show RUN HRS
to show F1 ENDS xx:xx
To Set
To Set
Shows/flashes start time
to show RUN HRS
to show F2 ENDS xx:xx
To Set
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action" (
Menu/Select button
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
*****
ignores any change to that menu item.
Sets start hour
Shows/flashes minutes
Sets Filter 1 length in hours
Shows/flashes minutes
To Set
*****
Waiting a few seconds
will lose any new Filter 1
Start Time and Run Hours and
revert to the previous Filter 1 settings.
Main Screen
Waiting
a few seconds
reverts to original setting
*****
To Set
Sets start hour
Shows/flashes minutes
Sets Filter 1 length in hours
Shows/flashes minutes
To Set
*****
Waiting a few seconds
will lose any new Filter 2 On/OFF,
Start Time and Run Hours and
revert to any previous Filter 2 settings.
Purge Cycles
In order to maintain sanitary conditions, secondary Pumps and/
or a Blower will purge water from their respective plumbing by
running briefly at the beginning of each filter cycle.
If Filter Cycle 1 is set for 24 hours, enabling Filter Cycle 2 will
initiate a purge when Filter Cycle 2 is programmed to begin.
)
Sets 15-minute increments
Waiting
a few seconds
reverts to original setting
*****
Sets 15-minute increments
Wait to
Revert
*****
2X
Main Screen
Sets 15-minute increments
Waiting
a few seconds
reverts to original setting
*****
Sets 15-minute increments
Wait to
Revert
*****
2X
Main Screen
17