Astoria Core200 Manual De Uso Y Mantenimiento página 43

7.3
Autosteamer
• Immerse the steam nozzle in the
milk to be foamy, together with
a thermometer to control the
temperature;
• Press the button for at least
5 seconds until the
flashes;
• Press the Autosteamer
button;
• Check with the thermometer the
temperature of the milk and, once
reached the desired one, lock
the dispensing by pressing the
Autosteamer button;
• when the programming is com-
plete, press the
wait 20 seconds.
Avoid contact with the hot water nozzle,
do not place your hands or other body
parts near the hot water nozzle tips.
User manual
button
button, or
7.4
Stand-by mode
To activate machine's stand-by function, proceed as
follows:
• on the right keypad, press and hold down the
key and immediately afterwards press and hold the
key ;
• the key starts flashing in "slow" mode.
• To exit the stand-by state, press the button
the same keypad.
7.5
Pre-set values
Use this procedure to reset the factory values both
for the coffee beverage doses.
Proceed as follows:
• Turn the machine OFF;
• switch the machine and press and hold down the
, and buttons of the right pushbutton panel;
• release the buttons only after having checked that
the LED keys of everyone push-buttons panels
is flashing;
• turn the machine OFF and ON .
Core200
on
43