Astoria Core200 Manual De Uso Y Mantenimiento página 48

Core200
8.5.6 Steam nozzle/autosteamer cleaning
Clean the steam spout once a
week as follows:
• Immerse the spout in a jug with
water and a specific detergent
according to manufacturer's in-
structions;
• heat the solution with the steam
of the spout;
• let the spout cool off keeping it immersed in the solu-
tion for at least 5 minutes to allow the detergent to
rise inside the spout by cooling effect;
• repeat the operation 2 or 3 times until milk is deliv-
ered.
9.
SPARE PARTS
Machine components and/or parts must be replaced
only by the Maintenance Technician.
Under no circumstances are Users authorised to replace machine
components and/or parts.
10.
DECOMMISSIONING
The machine must be decommissioned by the Main-
tenance Technician, because the equipment must be
disconnected from the electricity and water mains, and
all the internal circuits must be emptied of the water.
The commissioning of the machine after this period
must be performed only by the Maintenance Technician.
Under no circumstances are Users authorised to decommission
and/or recommission the machine after long periods of inactivity.
11.
DISASSEMBLY
The dismantling of the machine must be performed
by the Maintenance Technician.
48
12.
DISPOSAL
12.1
Disposal information
For the European Union and the Euro-
pean Economic Area only.
This symbol indicates that the prod-
uct cannot be disposed of with house-
hold waste, pursuant to the WEEE Direc-
tive (2012/19/EC), the Battery Directive
(2006/66/EC) and/or the national laws implementing
those Directives.
The product should be handed over to a designated
collection point, for example the dealer when purchas-
ing a new product with similar features, or an authorised
collection site that recycles electrical and electronic
equipment waste (WEEE), as well as batteries and ac-
cumulators. Improper handling of this type of waste
can have negative consequences on the environment
and human health, due to the potentially hazardous
substances which are usually found in this kind of waste.
Your cooperation in correctly disposing of this
product will contribute to the effective use of natural
resources and you will avoid incurring fines provided by
law. For more information about recycling this product,
contact either your local authority, the entity responsible
for waste collection, an authorised dealer or your house-
hold waste disposal service.
Before disposing of the machine, we recommend seeking advice
from the seller.
12.2
Environmental information
The machine features an internal lithium button bat-
tery, which is located in the circuit board and ensures
data storage.
Dispose of the battery in accordance with current
national regulations.
User manual