Publicidad
Idiomas disponibles
Idiomas disponibles
FINAL INSTALLATION
CAUTION: Before starting installation,
disconnect the power by turning off the
circuit breaker or removing the fuse at the
fuse box. Turning power off using the fan
switch is not sufficient to prevent electric
shock.
NOTE: If the light kit could be wobbled by
hand, it means the light kit is not twisted
completely till the right position. Keep
twisting the light kit till it could not be wobbled
by
hand.
1. While holding the 20W LED light kit (F)
under the fan motor assembly (E), snap
together the wire connection plugs :
White to white
Black to black
Position the notches on the inner edge
of the 20W LED light kit (F) so they match
the tabs on the outside of the rim on the
light kit mounting plate. Carefully lift the
20W LED light kit (F) inside the light kit
mounting plate and secure it to the fan by
turning the 20W LED light kit (F) clockwise
until snug.
1
Light Kit Mounting
Plate
Wire Connection
Plugs
Notches
11
Tabs
Publicidad
