Braun Aesculap Acculan 3Ti Instrucciones De Manejo/Descripción Técnica página 7

1.3 Indications
The type and area of application depend on the tool
selected.
1.4 Absolute contraindications
The product is not licensed for use on the central ner-
vous system or central circulatory system.
1.5 Relative contraindications
The safe and effective use of the product greatly
depends on influences which can only be controlled by
the user. Therefore the specifications provided repre-
sent framework conditions only.
Clinically successful use of the product is dependent on
the knowledge and experience of the surgeon. The sur-
geon must decide which structures it is sensible to
treat and take into account the safety and warning
information contained in these instructions for use.
2. Safe handling
Risk of injury and material
damage if this product is not
used as intended!
WARNING
►
Risk of injury and damage to
property due to improper han-
dling of the product!
WARNING
►
►
Remove the transport packaging and clean the new
product, either manually or mechanically, prior to
its initial sterilization.
►
Prior to use, check that the product is in good work-
ing order.
►
To prevent damage caused by improper setup or
operation, and in order not to compromise war-
ranty and manufacturer liability:
– Use the product only according to these
instructions for use.
– Follow the safety and maintenance instruc-
tions.
– Only combine Aesculap products with each
other.
Use the product only for its
intended purpose.
Follow the instructions for
use of all products used.
►
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
►
Use product and accessories in surgery and/or in
the framework of emergency medical care.
►
Keep the instructions for use accessible for the
user.
►
Always adhere to applicable standards.
3. Product description
3.1 Scope of supply
Designation Art. no.
Key for Jacobs GA031201
chuck attach-
ments
3.2 Components required for opera-
tion
Art. no. Designation
GA671 Acculan 3Ti small drill
GA672 Acculan 3Ti drill and reamer
Vary with Attachment
indication
Vary with Adapter
indication
Vary with Appropriate tools and Kirschner
indication wires
Note
For possible combinations of attachments with the
Acculan 3Ti small power drill GA671, follow the infor-
mation in Instructions for Use, see TA012033!
en
Enclosed
For drill attach-
ment GB634R,
GB638R and
reamer attach-
ment GB658R
5