BTS BTKF-K Serie Manual Del Usuario página 56

Bombas de aceite caliente

Idiomas disponibles

LUBRICATION

Bearings in ERDURO pumps are designed to be lubricated with grease or liquid oil

and having an easy maintenance.

OIL CONTROL

- If pump has waited before installation for a long time (more than 3 months),

bearings should be greased. If liquid oil is used in bearings, old oil should be

removed and filled with new oil.

- Before running the pump, pump bearings should be checked whether dirt has

entered inside it. If there is dirt inside bearings they should completely be cleaned

and new liquid oil or grease should be filled.

-Oil filling or adding operations should be determined by enterprise according to

conditions in workplace and operation. This method is efficient.

-Pumps which are lubricated with liquid oil are shipped without oil. This type of

pumps should be filled with oil up to indicator level before starting to operation.

SAFETY CONDITIONS

- Works should be done by obeying workplace occupational safety rules.

- Inside of pumps should be cleaned after fluid has been discharged from pump.

- Reliability of explosive, poisonous, hot and substances in crystal structure with

respect to environment and human health should be assured.

- Considering that used cleaner and protector solvent wastes may give harm to

environment and human health; precautions should be taken for preventing

dissipation to environment and mixing to suction pool. Accumulation and putting the

used waste solvents in disposal area should be cared.

- Working area where dismounting and installation works are performed should be

clean.

- Pump should be free of all dangerous materials and be clean during return back.

- Lifting tools and equipments which are suitable with objective and occupational

safety should be used in dismounting and installation operations.

DISMOUNTING OF PUMP AND REPAIR

ATTENTION! - Before starting to any operation over pump always disconnect the

electrical connections and be sure that it will not run mistakenly. Certainly obey the

instructions which are given in "Safety Instructions".