Descargar Imprimir esta página

Toyotomi FF-V30T Instrucciones De Uso página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3. Set Clock
IMPORTANT: Clock on the heater must always be set to current time and day.
NOTE: "tHOUR" or "sMIN." button will change the time every one (1) unit.
Holding the button continuously will cause the time to change rapidly.
NOTE: In the event of a power failure (more than approx. 30 min.), all clock and
day may be cancelled.
4. Setting of the Time and a Day of the Week.
1) Current time is not set yet. (All signs light on solid.)
When the "sMIN." button or "tHOUR" button is pressed while the operation is stopped, all displays
except the colon ":" will be blinking.
When the "sMIN." Button or the "tHOUR" button is pressed again, the bar display ("Two Dashes")
changes to "0 00"
2) Setting of the current time
Press the "sMIN." button to set minutes and press the "tHOUR" button to set hours.
When pressing the "tHOUR" button, the sign will change as follows.
" 0:00" ➞ " 1:00" ➞ ··· ➞ "23:00" ➞ " 0:00" ➞ ···
When pressing the "sMIN." button, the sign will change as follows.
" 0:00" ➞ " 0:01" ➞ ··· ➞ " 0:59" ➞ " 0:00" ➞ ···
Press the "SET" button to complete the set of the current time.
3) Setting of a day of the week
"dAy" sign is shown on the display and day of the week will blink.
Press the "sMIN." button or the "tHOUR" button to set a day of the week. A day of the week will blink.
(Initial setting is "SUN".) The other days of the week will go off. Select a day of the week by using the "sMIN."
or the "tHOUR" button. When pressing the "sMIN." button, the sign will change as follows.
"SUN" ➞ "MON" ➞ "TUE" ➞ "WED" ➞ "THU" ➞ "FRI" ➞ "SAT"
When pressing the "sMIN." button at the position of "SAT", you can hear a beep sound and "SAT" is not
changed any more. When pressing the "tHOUR" button, the sign will change as follows.
"SAT" ➞ "FRI" ➞ "THU" ➞ "WED" ➞ "TUE" ➞ "MON" ➞ "SUN"
When pressing the "tHOUR" button at the position of "SUN", you can hear a beep sound and "SUN" is
not changed any more.
Press the "SET" button to complete the setting of the days of the week. The current time and a day of the
week will show on the display.
NOTE: In case, ON/OFF button is pressed while the time and day is setting, the setting will not be
completed. Set the time and day again.
GB
8
FF-V30T_FF-V30_Type E_6 language_A4.indb
8
ENGLISH
2023/06/21
17:59:15

Publicidad

loading

Este manual también es adecuado para:

Ff-v30