When the heater is on and clock is set (See SECTION D: OPERATION), it will automatically stop and clean the
igniter every day at 2:00 and will display "CL" on the digital indicator. After the cleaning mode is finished the heater
will automatically re-ignite and continue to burn again.
The igniter cleaning mode helps prolong the igniter life.
Heater will clean igniter for ten (10) minutes manually.
1. When ON/OFF switch is "OFF", press the "TIMER" button and "POWER SAVER" button at the same time for
more than three (3) seconds.
2. Display will appear "CL:10" on Display. Cleaning will begin and end without any additional input.
NOTE: Cleaning igniter is important to prolong igniter life. It is recommended that the igniter be cleaned once a
month if the time is not set.
GB
16
FF-V30T_FF-V30_Type E_6 language_A4.indb
AUTOMATIC IGNITER CLEANING SYSTEM
MANUAL IGNITER CLEANING SYSTEM
16
ENGLISH
2023/06/21
17:59:17