Toyotomi FF-V30T Instrucciones De Uso página 9

Your heater is equipped with the following safety features.
Please familiarize yourself with these features.
When your heater is extinguished due to a safety machanism, be sure to identify the problem correctly.
1. Flame Sensor
Heater will automatically stop all operations if ignition fails or if flame fails during combustion, in order to prevent
fuel overflow. Error code will be displayed on the operation panel.
2. Fuel Strainer (FF-V30)
Special strainer catches dirt or impurities present in the fuel before it is sent to the burner.
3. Overheat Protector
Automatically stops all operations if the heater's inside cabinet reaches abnormally high temperature due to mo-
tor malfunction or abnormal combustion, in order to prevent fire.
4. Power Failure Recovery System
If power fails during heater operation, heater will automatically reignite and maintain the selected
temperature,when power resumes.
NOTE: The operation varies depending on the time length of power failure and other conditions.
(See SECTION D: OPERATION)
5. Fully Vented System
Flue Pipe system uses outside air for combustion and vents all combustion products to outdoor.
FF-V30T_FF-V30_Type E_6 language_A4.indb
SAFETY FEATURES
Heat shield plate
Overheat protector
Heat exchanger
Peep hole
Burner ring
Igniter
Burner
Blower motor Fuel acceptance fitting
FF-V30T
3
Heat shield plate
Overheat protector
Removable fuel tank
Heat exchanger
Flame sensor
Peep hole
Burner ring
Fuel pipe
Igniter
Fuel pump
Burner
Blower motor Fuel strainer (inside)
Fuel sub tank
FF-V30
ENGLISH
Flame
sensor
Fuel pipe
Fuel pump
Red float
release
button
Fuel sump
2023/06/21
GB
3
17:59:14