Toyotomi FF-V30T Instrucciones De Uso página 17
Ocultar thumbs
Ver también para FF-V30T:
- Instrucciones de instalación y operación (22 páginas) ,
- Instrucciones de instalación (28 páginas) ,
- Instrucciones de instalación y de operación (36 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
WEEKLY TIMER OPERATION
1. Weekly Schedule setting
NOTE: The following Weekly Schedule is set by the factory. This programming can be changed.
Day
TIME ON/OFF SET temp. TIME ON/OFF SET temp. TIME ON/OFF SET temp. TIME ON/OFF SET temp.
MON
6:30
TUE
6:30
WED
6:30
THU
6:30
FRI
6:30
SAT
8:00
SUN
8:00
NOTE: The current time and day of the week must be set first before the Weekly schedule settings can be
changed.
NOTE: The Weekly schedule settings cannot be entered or changed while the heater is ON and in AUTO mode.
Turn "AUTO" off. It does not matter if the heater is OFF or ON to enter the Weekly schedule settings
mode, as long as the AUTO is off.
Program Selection
1. Press the "TIMER" button to enter the weekly schedule settings mode. The word "TIMER", "SUN", "P01"
and "ON" will be shown on the display.
If you press the "TIMER" button while in the weekly schedule settings mode, the word "TIMER" will
disappear from the screen and the weekly schedule settings mode will be exited. Any changes before
the "SET" button was pressed will not be saved.
If the heater is turned off during the weekly setting mode, the weekly schedule setting mode will be
exited.
2. Press the "sMIN." or "tHOUR" button to change the program number you with to set or wodify.
The programs range from P01 to P04 for each day of the week, starting with Sunday and ending with
Saturday (The heater has 4 programs for each day). When pressing the "sMIN." button, the display will
change as follows.
"SUN P01" ➞ "SUN P02" ➞ "SUN P03" ➞ "SUN P04" ➞ "MON P01" ➞ "MON P02" ➞ ... ➞ "SAT P04"
NOTE: When the "tHOUR" button is pressed while at the bottom of programming which is P01 on
Sunday (SUN), the program number cannot be changed. If you press the "sMIN." button while
on P04 on Saturday (SAT), which is the top of the programming, the program number cannot be
changed.
3. Press the "SET" button to confirm changes and to go to the Program Time Settings.
The program number is initialized by pressing and holding the "CLEAR" button for 3 seconds. It is not
necessary to initialize the memory if you plan to change it.
FF-V30T_FF-V30_Type E_6 language_A4.indb
P01
P02
ON
21˚C
8:00
ON
ON
21˚C
8:00
ON
ON
21˚C
8:00
ON
ON
21˚C
8:00
ON
ON
21˚C
8:00
ON
ON
21˚C
10:00
ON
ON
21˚C
10:00
ON
11
P03
18˚C
18:00
ON
21˚C
18˚C
18:00
ON
21˚C
18˚C
18:00
ON
21˚C
18˚C
18:00
ON
21˚C
18˚C
18:00
ON
21˚C
18˚C
18:00
ON
21˚C
18˚C
18:00
ON
21˚C
ENGLISH
P04
22:30
ON
16˚C
22:30
ON
16˚C
22:30
ON
16˚C
22:30
ON
16˚C
22:30
ON
16˚C
23:00
ON
16˚C
23:00
ON
16ºC
GB
11
2023/06/21
17:59:16
Publicidad
