ENGLISH
SECTION H:
INSTALLATION
GENERAL DESCRIPTION: The FF-V30T/FF-V30 is designed to be installed in an outside wall so the full advantage
of installation simplicity can be made with the "Flue Pipe", which eliminates the need for tall chimney type flues.
No hearth or fire surround is required.
STANDARD INSTALLATION PARTS
The following standard installation parts are enclosed with heater. For alternate installation methods, you may need
to purchase additional accessories which are available from your TOYOTOMI dealer. (See ACCESSORY PARTS)
Wall Bracket (2 sets) (PART #17212689)
Tapping Screw (2) (PART #17208678)
Bind Tapping Screw (2) (PART #17187555)
Wood Screw (2) (PART #17206066)
(1) (PART #17206066)
Pipe Holder (1) (PART #17212685)
(Room temperature sensor)
(3)
Flue Pipe (1) (PART #17224296)
Wood Screw (3)
Exhaust Air Cap (1) (PART #17212661)
Pipe Stopper (1) (PART #17212678)
(PART #17206066)
Intake Air Cap (1) (PART #17212656)
Bent Joint (L) (1)
Insulating Cover
(PART #17212698)
(PART #17206025)
L-shaped Hose (2) (PART #17212692)
Inlet Hose (1) (PART #17206091)
Hose Band (2) (PART #17212677) (Hose Clamp)
(FF-V30T)
(FF-V30)
Manual Fuel Pump (1) (PART #17027727)
Oil Catch (1) (PART #17185025)
GB
19
FF-V30T_FF-V30_Type E_6 language_A4.indb
19
2023/06/21
17:59:18