Press ON/OFF button to "OFF" position. ON lamp will flash and will go out. Circulation fan
and blower motor continue to run for approx. three (3) minutes to cool down the heater.
SECTION E:
ROUTINE MAINTENANCE
CAUTION: Be sure to turn off and unplug heater before performing any checks or cleaning.
CAUTION: Allow heater to cool completely before cleaning or maintenance.
FOR OPTIMUM HEATER PERFORMANCE AND PROLONG HEATER LIFE, THE PARTS SHOWN BELOW SHOULD
BE CLEANED REGULARLY:
Louver
1. Clean Louvers (ONCE A WEEK)
Dust and stains should be wiped off louvers with a damp cloth.
2. Clean Circulation Air Filter (ONCE A WEEK)
A mesh filter is located on heater cabinet rear side.
Once a week slide the filter up to remove and it should
be vacuumed clean.
GB
14
FF-V30T_FF-V30_Type E_6 language_A4.indb
TURNING HEATER OFF
Ciraulation air filter
Circulation fan
FF-V30T
14
Louver
Fuel strainer (inside)
FF-V30
ENGLISH
Ciraulation air filter
Circulation fan
2023/06/21
17:59:17