STERWINS UP40 Instrucciones De Montaje, Utilización Y Mantenimiento página 199

4. ASSEMBLY
WARNING! THE PRODUCT MUST BE FULLY ASSEMBLED BEFORE
OPERATION! DO NOT USE A PRODUCT THAT IS ONLY PARTLY
ASSEMBLED OR ASSEMBLED WITH DAMAGED PARTS! FOLLOW
THE ASSEMBLY INSTRUCTIONS STEP-BY-STEP AND USE THE
PICTURES PROVIDED AS A VISUAL GUIDE TO EASILY ASSEMBLE
THE PRODUCT !
4.1 UNBOXING
1
2
3
4
5
6
7
Unboxing instructions :
→ Wear gloves when unboxing.
→ Do not use cutter, knife, saw or any other similar tool for unboxing.
→ Carry the tool only by the handle (6).
→ Keep the box for further reuse (transport and storage).
→ Keep instruction manual in a dry area for further consultation.
4.2 INSTALLATION
Set up the lawn mower : illustration 2.1 to 2.3
Set up the lawn mower on flat and firm ground to ensure safe and sturdy operating.
Release the quick clamp of the lower handle, hold the lower handle to the operation position.
Fix the upper and lower handles with the quick clamp .
Grass collection : illustration 2.3 to 2.4
Before installing, make sure the grass box has been properly attached to the metal grass
collection box frame via the clips around the mouth of the box.
Lift the rear discharge door . While holding the door open, place the grass collection box with
handle side up into the grooves under the hinge of the rear discharge door , making sure that the
hooks rest properly inside their respective grooves. After stopping, lift the rear discharge door ,
take the grass collection box away.
8
9
10
11
199
1. Switch Button
2. Upper Handle
3. Quick Clamp
4. Grass Collection Box
5. Rear wheel
6. Side discharge
7. Front wheel
8. Driving bar
9. Switch bar
10. Collection bag latch
11. Safety Key & Battery cover
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN