Zipro Force Gold Manual De Uso página 16

STEP 3.
Fit the left and right handle arms (6 L/R), the left handle arm covers (57 L) and all three steering column cover components (65 a/b/c) to the steering
column (4) using hex bolts (60), spring washers (10), flat washers (37) and wave washers (61). Do not tighten them firmly for the time being.
Connect the left and right handle arms (6L/R) to the left and right pedal bars (5L/R) using hex bolts (54), bushing (55), universal joint (42), flat washer (27)
and nylon cap (28). Then tighten the hexagon bolts (60).
Fit the pedal rod covers (56L/R) to both handle arms (6L/R) using the self-tapping screws (62).
STEP 4.
Fit both handles (7L/R) to the handle arms
(6L/R) using internal hex bolts (9), spring
washers (10) and arc washers (32). Then
screw both handle arm cover pieces (57 L/R)
to both handle arms (6 L/R) using self-
tapping screws (62).
Connect the pulse leads (52) and extension
cable (44) to the computer leads (63), then
screw the computer (63) to the steering
column (4) using Phillips screws (64).
Connect the power supply (40) to the power
supply and place the cable in the power
socket on the rear side of the main frame as
shown opposite.
EN
16