Zipro Force Gold Manual De Uso página 21

EN
TROUBLESHOOTING
CAUTION! Opening the housing of the device without a prior contact with a manufacturer's service voids the warranty. If you suspect a failure that requires
the housing to be opened, contact manufacturer's service.
Error description
The device rocks to sides
The saddle or handlebar sway
Noise during use
Noise and uneven operation
Lack of appropriate
resistance during training
WARRANTY
On behalf of the Warrantor, the seller grants a 24-month warranty in the territory of the Republic of Poland starting on the date of sale.
The warranty for the product does not exclude, limit, or suspend any rights of the Buyer under the Consumer Rights Act.
WARRANTY TERMS AND CONDITIONS
1. The warranty covers only latent defects attributable to the manufacturer.
2. The claim shall be processed by the point of sale or technical service under the warranty if the customer produces:
a.
b.
c.
In the case of a remote purchase, the warranty card is valid solely with a proof of purchase (receipt/invoice).
3. The claim is resolved within 14 days of the report by the Customer.
4. Manufacturing defects identified in the warranty period shall be repaired free of charge within 21 days following the delivery of the product to
the point of sale or technical service.
5. If it is necessary to import parts for the repair, the warranty repair period may be extended by the time necessary to import the part, not longer
than by 40 days.
6. Warranty exclusions:
a.
b.
c.
d.
7. The warranty shall not apply when:
a.
b.
c.
d.
e.
8. No duplicates of the warranty card are issued.
9. The customer is entitled to the following compensation free of charge:
a.
b.
21
Possible causes
The device was placed on an uneven surface.
There is an object disrupting the balance under the base
of the device.
The bases have not be assembled correctly.
Caps on the base have not been installed and levelled
correctly.
Bolts and knobs of the saddle column or handlebar
column have not been tightened.
Incorrectly tightened elements.
Slight humming noise may be heard during operation due to the inertial movement of the flywheel caused by the
nature of the structure. It does not affect the operation of the device. Any possible humming noises heard when
rotating the pedals backwards occur for technical reasons and have no negative consequences.
Bearings damaged.
Computer cable connected incorrectly.
Drive belt loose.
The distance between the flywheel and
the magnets increased.
Voltage regulator damaged.
--- Grip not work correctly.
E-1 The device receives no input while measuring the user's
body fat.
E-2 Power system error.
E-4 The numerical scale was exceeded when reporting the
age, height, or weight of a user.
E-7 The cables connecting the console to the bike have
become disconnected or are not connected properly.
a valid and clear warranty card filled in properly with a sale stamp and signature of the seller,
a valid proof of purchase with the date of sale,
the reported product or defective part.
mechanical damage and related defects,
damage and defects resulting from misuse and inappropriate storage, assembly, and maintenance,
damage and wear of such consumable elements as cables, belts, rubber elements, pedals, foam grips, wheels, bearings,
and upholstery,
activities related to the assembly or maintenance that are user's obligation in accordance with the manual.
it is past its validity period,
the customer had repaired or modified the product using non-genuine parts,
the defect resulted from incorrect installation or a failure to follow the rules of correct operation in accordance with the manual,
the product is used for purposes other than household use,
damage occurred during transport.
product repair,
product replacement,
Solution
Place the device on an even surface.
Remove the object that upsets the balance.
Assembly the bases correctly.
Level the caps on the rear base.
Assembly the rear base correctly.
Level the caps on the rear base.
Tighten the bolts and knob of the saddle or handlebar
column.
Contact the manufacturer's service.
Contact the manufacturer's service.
Connect the cable correctly as per the assembly manual.
Contact the manufacturer's service.
Contact the manufacturer's service.
Contact the manufacturer's service.
Contact the manufacturer's service.
Keep both hands on the pulse sensors during the
measurement.
Contact the manufacturer's service.
When entering user data, provide data that fit the scale.
Disconnect the power source, then disconnect the
cables. Reattach the cables and power source. If the
error occurs again, repeat the process.