Publicidad
Idiomas disponibles
Idiomas disponibles
Always wear gloves when
CAUTION
changing or handling
blades. Blade tips can cause personal injury.
a. Disconnect the battery pack and remove the
table insert.
b. Turn the elevation wheel clockwise until the
blade is up as high as it will go.
c. Remove the smart guard system.
d. Lift up the arbor lock lever, and slowly rotate
the blade by hand until the lock fully engages
the saw's arbor shaft and stops rotation
(Fig. 7b).
e. Loosen the arbor nut counterclockwise with
the blade wrench provided (Fig. 7c).
f. Set the blade wrench aside, continue to
loosen the arbor nut by hand, and remove the
arbor nut and outer washer. The blade may
now be removed by sliding it off the arbor
shaft, leaving the inner washer on the arbor
shaft (Fig. 7d).
g. Install the new blade on the arbor shaft,
making certain the teeth of the blade are
pointing down at the front of the table.
The printing on different saw
NOTICE
blades is not always on the same
side.
h. Install the outer washer and arbor nut.
i. Lift up the arbor lock lever, and securely
tighten the arbor nut clockwise with the blade
wrench. Turn the saw blade a few times
by hand to see if there is any jamming and
confirm that there is no problem with the
rotation of the saw blade.
j. Reinstall and secure the table insert.
USING CARBIDE-TIPPED BLADES
Handle carbide-tipped blades carefully. Carbide
is very brittle and can be easily damaged.
Use caution when you install, use or store the
blades.
Do not use a carbide-tipped blade that is bent
or has bent teeth, or if the blade has cracks, is
broken, or has missing/loose carbide tips. Do
Fig. 7c
Fig. 7d
not operate a carbide-tipped blade faster than
its recommended speed. When selecting a
blade, ensure it is rated above 6000 RPM and
the diameter of the blade matches the markings
on the saw and the bore diameter 5/8ʺ (15.88
mm).
Read, understand, and follow all warnings and
instructions provided with your carbide-tipped
blades.
-22-
Blade Wrench
Blade
Outer Washer
Arbor shaft
Arbor Nut
Inner Washer
Publicidad
